董兰兰

n 研究方向

l 增材制造（生物3D打印）

l 柔性传感器（应变、视觉）

n 工作及学习经历

2022.10-至今    新疆大学        机械工程学院          副教授

2018.9-2022.9   上海交通大学     机械工程专业           工学博士

2015.9-2018.6   新疆大学        机械工程专业          工学硕士

2011.9-2015.6   新疆大学        机械工程及自动化专业     工学学士

n 科研成果

l 主持新疆维吾尔自治区计划1项

l 主持新疆维吾尔自治区自然科学基金（青年）1项

[1] RU Y, DONG L※, JIA R, WANG J, DONG L, WURIKAIXI A, SHUAI C. DLP-printed microstructured sensors with enhanced sensitivity for wearable physiological monitoring[J]. Composites Part B: Engineering, 2026, 310:113169. (通讯, 中科院1区，IF= 14.2 )

[2] LIU X, DONG L※, RU Y, DONG L, AIYITI W, SHUAI C. A microgel-microstructure synergistically enhanced flexible sensor via DLP 3D printing for wearable electronics[J]. Chemical Engineering Journal, 2026, 532:174211. (通讯, 1区，IF= 13.5 )

[3] ALIMU R, DONG L※, AIHEMAITI P, JIANG H, AIYITI W, SHUAI C. In-situ extrusion 3D printing with tea polyphenol crosslinking for Hyaluronic acid sodium salt -based composite hydrogel scaffolds[J]. Colloids and Surfaces B: Biointerfaces, 2026, 257:115095. (通讯, 1区)

[4] ZHENG X, DONG L※, JIANG H, AIHEMAITI P, AIYITI W, SHUAI C. Three-dimensional printed ionic conductive hydrogels with tunable mechanical properties for wearable strain sensors[J]. Colloids and Surfaces B: Biointerfaces, 2025, 255:114912. (通讯, 1区)

[5] DONG L※, RU Y, GAO X, JIA R, WANG J, AIYITI W, SHUAI C. 3D-Printed Auxetic Ionic Hydrogels with Moisture Retention and High Sensitivity for Sustainable Wearable Sensing[J]. Biomacromolecules, 2025, 26(5):3155-3166. (一作&通讯, 1区)

[6] LIU X, JIANG H, AIHEMAITI P, AIYITI W, SHUAI C, DONG L※. Enhancing the Mechanical Properties of Microgels through Interstitial Matrix Addition in 3D Printing[J]. ACS Applied Polymer Materials, 2025, 7(22):15219-15228. (通讯, 2区)

[7] LI Z, AIYITI W, SHUAI C, DONG L※. Tannic Acid-Induced Resolution Enhancement of 3D-Printed Hydrogel Constructs[J]. ACS Applied Polymer Materials, 2025, 7(1):457-466. (通讯, 2区)

[8] DONG L※, JIA R, LIU Z, AIYITI W, SHUAI C, LI Z, FU Q, LI X. Tannic acid based multifunctional hydrogels with mechanical stability for wound healing[J]. Colloids and Surfaces B: Biointerfaces, 2024, 243:114127. (一作&通讯, 1区)

[9] DONG L, HAN Z, ZHANG H, YANG R, FANG J, WANG L, LI X, LI X. Tea polyphenol/glycerol-treated double-network hydrogel with enhanced mechanical stability and anti-drying, antioxidant and antibacterial properties for accelerating wound healing[J]. International Journal of Biological Macromolecules, 2022, 208:530-543. (一作, 1区)

[10] DONG L, HAN Z, LI X. Tannic Acid-mediated Multifunctional 3D Printed Composite Hydrogel for Osteochondral Regeneration[J], International Journal of Bioprinting, 2022, 8(3):587. (一作, 1区)

[11] DONG L, BU Z, XIONG Y, ZHANG H, FANG J, HU H, LIU Z, LI X. Facile extrusion 3D printing of gelatine methacrylate/Laponite nanocomposite hydrogel with high concentration nanoclay for bone tissue regeneration[J]. International Journal of Biological Macromolecules, 2021, 188:72-81. (一作, 1区)

n 联系方式

电话：13699364416

邮箱：lanlandong@xju.edu.cn

地址：新疆乌鲁木齐市水磨沟区华瑞街777号新疆大学博达校区机械工程学院